ZhiAnBao 315MHz/433.92MHz Wireless Remote Control Receiver Board Module ZR2-1

1.Cheap and fine receiver 2 Efficient and durable receiver 3 High quality, 1 year warranty 4.OEM, ODM 5.Best for you ZhiAnBao 315MHz/433.92MHz Wireless Remote Control Receiver Board Module ZR2-1

Features :

RF integrated circuit design, stable frequency, high sensitivity.

Tech Spec :

Operating Frequency	315MHz/433.92MHz
Operating Voltage	DC5V±0.3V
Operating Current	2mA
Modulation Mode	ASK
RF Sensibility	-108dBm
Output Level	TTL level
Operating Temp	-10 °C ~ +60 °C
Dimension	30mm*12.5 mm*8.1mm

Details:

 Low power consumption, high sensibility of this Receiver Board Module

 

 Easy operation & installation  Make convenient for your daily use

Application:

 Remote control, remote measurement and remote sensingAnti-theft alarm signal receiving and various remote controls for home-appliances

How Do Remote Controls Work?

 Generally, there are two types of remote controls: infrared (IR), and radio frequency (RF). Infrared remote controls work by sending pulses of infrared light to a device, while RF remote controls use radio waves in much the same way. Pragmatically, the biggest difference between the two is range. IR remote controls require a clear line of sight to the receiving device and their range maxes out at about 30 feet (9.14 meters). RF remote controls can go through walls and around corners, with a range of roughly 100 feet (30.48 meters)

 

Most home entertainment components such as stereos, televisions and home entertainment centers use IR remote controls. The remote contains an internal circuit board, processor, and one or two Light Emitting Diodes (LEDs)

 

When you push a button on a remote control, it transmits a corresponding code to the receiving device by way of LED infrared pulses. The idea is somewhat akin to flashing an SOS signal, but instead of letters, the flashing LED light is transmitting a series of 1s and 0s. The "1" might be represented by a long flash, while "0," a short flash. A receiver, built into the component, receives the pulses of light and a processor decodes the flashes into the digital bits required to activate the function

 

Along with the desired function, remote controls must also piggyback other data. Firstly, they transmit the code for the device they are controlling. This lets the IR receiver in the component know that the IR signals it is picking up are intended for it. It essentially tells the component to start listening. The function data follows, capped by a stop command to tell the IR device go back into passive mode

 

Some remote controls can be very finicky, requiring the user point the remote directly at the component. This is due to a weak transmitter. Changing the batteries can help, but if the transmitter itself is poor, pulses are transmitted in a narrow beam. More robust IR transmitters, and remote controls with double LEDs, transmit broader beams that allow the user to point the remote in the general direction of the transmitter

 

Sometimes it happens that a recliner or favorite spot on the couch does not have a clear line-of-sight to the entertainment center or television. Often a coffee table or some other object is in the way. When this happens we find ourselves raising an arm, trying to control the object "around" the device. This can get quite annoying, but there's an easy alternative

 

Since light bounces off objects it is sometimes more convenient to point remote controls towards a flanking wall or even the ceiling to change a channel or send a function command. The light will bounce off the surface of the wall or ceiling and scatter. If you bounce it at an advantageous angle, the scattering light will reach the component. Often it's easiest, with elbow resting on an armrest, to flip your wrist back and point the remote up at a wall behind you. This can work quite well, even though the remote is pointing in the exact opposite direction of the component. Once you find the easiest sweet spots around the room from which to bounce your signal, you can use these instead of struggling with trying to get around your obstructed line of sight

 

Garage door openers, alarm systems, key fobs and radio-controlled toys use RF remote controls. RF remote controls work essentially the same as IR remote controls, except they use radio waves. As stated, radio waves can also penetrate walls and go around objects and corners, making RF arguably more convenient than IR

 

Some high-end entertainment systems come with RF remote controls for expanded remote range. There are also IR-to-RF remote control converters that allow IR remote controls to extend their range through utilizing a RF translator that basically acts as a middleman. The RF converter relays the IR signal in RF waves to get it further. The converter on the component side reverts the RF signal back to IR so the component can understand it

 

Most home entertainment components such as stereos, televisions and home entertainment centers use IR remote controls. The remote contains an internal circuit board, processor, and one or two Light Emitting Diodes (LEDs)

 

When you push a button on a remote control, it transmits a corresponding code to the receiving device by way of LED infrared pulses. The idea is somewhat akin to flashing an SOS signal, but instead of letters, the flashing LED light is transmitting a series of 1s and 0s. The "1" might be represented by a long flash, while "0," a short flash. A receiver, built into the component, receives the pulses of light and a processor decodes the flashes into the digital bits required to activate the function

 

Along with the desired function, remote controls must also piggyback other data. Firstly, they transmit the code for the device they are controlling. This lets the IR receiver in the component know that the IR signals it is picking up are intended for it. It essentially tells the component to start listening. The function data follows, capped by a stop command to tell the IR device go back into passive mode

 

Some remote controls can be very finicky, requiring the user point the remote directly at the component. This is due to a weak transmitter. Changing the batteries can help, but if the transmitter itself is poor, pulses are transmitted in a narrow beam. More robust IR transmitters, and remote controls with double LEDs, transmit broader beams that allow the user to point the remote in the general direction of the transmitter

 

Sometimes it happens that a recliner or favorite spot on the couch does not have a clear line-of-sight to the entertainment center or television. Often a coffee table or some other object is in the way. When this happens we find ourselves raising an arm, trying to control the object "around" the device. This can get quite annoying, but there's an easy alternative

 

Since light bounces off objects it is sometimes more convenient to point remote controls towards a flanking wall or even the ceiling to change a channel or send a function command. The light will bounce off the surface of the wall or ceiling and scatter. If you bounce it at an advantageous angle, the scattering light will reach the component. Often it's easiest, with elbow resting on an armrest, to flip your wrist back and point the remote up at a wall behind you. This can work quite well, even though the remote is pointing in the exact opposite direction of the component. Once you find the easiest sweet spots around the room from which to bounce your signal, you can use these instead of struggling with trying to get around your obstructed line of sight

 

Garage door openers, alarm systems, key fobs and radio-controlled toys use RF remote controls. RF remote controls work essentially the same as IR remote controls, except they use radio waves. As stated, radio waves can also penetrate walls and go around objects and corners, making RF arguably more convenient than IR

 

Some high-end entertainment systems come with RF remote controls for expanded remote range. There are also IR-to-RF remote control converters that allow IR remote controls to extend their range through utilizing a RF translator that basically acts as a middleman. The RF converter relays the IR signal in RF waves to get it further. The converter on the component side reverts the RF signal back to IR so the component can understand it

Package Included:

 1 x Wireless Receiving Module

 

 

Application :

The RF receiver modules are widely used for data receiving and signal control and are specialized as preferred components in remote control garage, roller curtain, door locks, alarm system, industrial control.

About us:

We are special to produce wireless remote control, wireless receiver and transmitter modules , wireless receiver controller, infrared detector, door sensor, gas and smoke detectors and home anti-theft alarm system. Our organization consists of three main departments: R&D, Manufacturing and marketing. We hire more than 200 employees, including top engineers to invent more innovative and quality products. We have advanced equipment in our factory. At the same time, we ensure that our wireless products and security and protection systems are of the highest standard to meet international market .Our products are sold in North America, South America, Southeast Asia, Western Europe and Africa. Moreover, we can rapidly develop and manufacture wireless RF products as every customer's requirement on OEM or ODM basis.

If you have any question, please feel free to tell me, you can send email or chat online with me by MSN, SKYPE(zhianbao3), Trademanager (cn220097172) etc. Normally you can get response within 5 minutes.

We emphasize our reputation and appreciate your feedback.

ZhiAnBao 315MHz/433.92MHz Wireless Remote Control Receiver Board Module ZR2-1