mini encoder receiver rf (ZW20-J)

*receiver rf *High quality, test approved *12 years manufacturer *Factory price *OEM ODM

Item: mini encoder receiver rf (ZW20-J)

Features:

Cheap price, good performance characteristics. The sensitivity can reach-110dBm, greatly add to the receiving distance. 

ZW20-J regular working parameter	Usual range	Best range
Working frequency	300MHz ~ 440MHz	315MHZ/430.5MHZ/433.92MHZ
Demodulation mode	ASK
bandwidth	300KHZ
voltage (VDD, 300~370MHz)	+3.3V ~ +5.5V	3.3V/5V
voltage (VDD, 370~440MHz)	+3.6V ~ +5.5V	3.6V/5V
Current consumption	315MHZ 3.7mA
	433.92MHZ 4.7mA
Working temp (TA)	–35°C ~ +85°C	–10°C ~ +50°C
Demodulation rate	0.625KHz ~ 3KHz.	0.9KHz ~ 1KHz.
Decoding output level	High and low level
Encoder oscillation resistance choice	PT2262 encoder 2.2M to 4.7M eV1527 encoder 270K to 430K	PT2262 encoder 4.7M eV1527 encoder 330K
Static-free ESD sensibility	1ESD(2000V)	HBM mode: according to MIL-STD-883C standard, use method: Method 3015. Need to keep and use in static-free situation

Operation:

1. Press the button of ZW20-J for one time, and learning indicator light once, in press a button on the remote control of arbitrary, study indicating lamp glimmer four times, says learn successful, right now ZW20-J decoding the level of output feet locked state. (similar to PT2272-M4)

 2. Press the button of ZW20-J for 2 times , and at the same time learning indicator twice, in the press a button on the remote control of arbitrary, study indicating lamp glimmer four times, says learn successful, right now ZW20-J decoding output level for interlock feet state. (similar to PT2272-BMD at l1-l4)

 3. Press the button of ZW20-J for 2 times, at the same time, learning indicator light is three times, in the press a button on the remote control of arbitrary, study indicating lamp glimmer four times, says learn successful, right now ZW20-J decoding output level for the feet locked state. (similar to SC2272-T4)

 4. Press the button of ZW20-J for 2 times, at the same time, learning indicator light is four times, click on the remote control in any key, learning indicator light four flashes, say learning success, at this time ZW20-J decoding output level for the point start feet state.

 5. Hold learning button and hold it down, and at the same time learning lamp light 10 seconds long put out, says clear success, this time can loosen the learning buttons.

Pin describe

pin number	Pin name	Pin describe
1	ANT	RF signal input feet, the pin to access the antenna.
2	GND	Sub-pin power supply negative, also can meet the shielded wire high frequency landlines.
3	K1	Study choice function keys, low level effective (can connect a light touch the switch to the power negative)
4	VDD	Dc power positive input the pin
5	VT	D1- D4 output state instructions (initial for low level, decoding, successful output high)
6	VSS	Connect power negative
7/8/ 9/10	D1/D2/D3/D4	Decoding success, data output corresponding feet (initial for low level, decoding, successful output high)

Decoding the output pin and encoding chip data corresponding relations between the feet

ZW20-J Decoding output	Corresponding to 2262 encoding chip data pin	Corresponding to 1527 encoding chip data pin
D1	13	8
D2	12	7
D3	11	6
D4	10	5
VT	All the data above the pin	All the data above the pin

About us:

 

We are special to produce wireless remote control, wireless receiver and transmitter modules, wireless receiver controller, infrared detector, door sensor, gas and smoke detectors and home anti-theft alarm system.

 

Our organization consists of three main departments: R&D, Manufacturing and marketing. We hire more than 200 employees, including top engineers to invent more innovative and quality products.

 

We have advanced equipment in our factory. At the same time, we ensure that our wireless products and security and protection systems are of the highest standard to meet international market.

 

Our products are sold in North America, South America, Southeast Asia, Western Europe and Africa. Moreover, we can rapidly develop and manufacture wireless RF products as every customers' requirement on OEM or ODM basis.

 

If you have any question, please feel free to contact me, you can send email or chat online with me by Trademanager (cn1000801229) or msn / skype (zhianbao5) etc.

 

We emphasize our reputation and appreciate your feedback.

 

Company show:

 

 

 

 

Serial products:

 

  

 

mini encoder receiver rf (ZW20-J)